September 18, 2021

Reasonable comparison of wooden doors

Due to the wide variety of wooden doors on the market, how do you buy them?

At present, the classification of wooden doors in the market is mainly divided into six types: MDF molded doors, blockboard double-package doors, all solid wood 榫 structural doors, solid wood composite doors, flat solid wood composite doors, and styling solid wood composite doors. Experts remind that buying wooden doors should only be chosen, not necessarily expensive, to suit the principle.

All solid wood 榫 structure door: It adopts simple mechanized production, its structure is mainly for door frame 榫 connection, inlaid door core board, which is a medium and high-grade product on the market.

Solid wood composite door: It is produced by mechanized assembly line and uses solid wood composite technology. The door is made of pine wood, and various valuable solid wood hidden inner edges are covered with various precious wood veneers. The door core plates are made of perforated particleboard and medium density fiberboard.

Flat solid wood composite door: the door leaf frame is generally fir or pine, the middle part is made of laminated timber, or the paper honeycomb with the molded door is used, the hot pressed 5cm MDF, the surface is hot pressed and coated with 0.3-0.6mm solid wood. Veneer, because it needs to be hot pressed twice, the surface of the door leaf is very flat, and the inside is fully bonded without cracking.

Modeling solid wood composite door: Because the veneer curve wrapping technology of the closing line is only in a few famous brand manufacturers, many of the market use solid wood lines to close the mouth, which eventually leads to the color difference of the door leaf, thus affecting the overall effect.

MDF molded door: MDF is double-sided molded, the door core is hollow, the style is single, and the grade is relatively low. A few hundred yuan a set.

Blockboard double-package door: semi-manual semi-mechanical production, door core pine frame, thin wood door and two breads, single style, mainly flat door.


Glassware is a broad international spectrum of equipment used in the brewing and consumption of tea. Many components make up that spectrum, and vary greatly based upon the type of tea being prepared, and the cultural setting in which it is being prepared. This is often referred to as the tea ceremony, and holds much significance in many cultures, particularly in northwestern Europe and in eastern Asia.





High borosilicate glass


Hand blown


50 to 5000ml or as your requirements


150 to 2000g and so on

Sealing type

Screw cap or cork


Any color as you requirement

Quality control

SGS, FDA, ISO9001, ISO14001

Deep processing

Silk screen, decal, spray painting, electroplating, frosting, sand blasting.

Delivery term


Payment terms


Lead time

New design drawing confirm within 3days, Sample mold within 20 days, bulk molds within 30 days, produce in bulk within 30 days


Q:  Are you a manufacture or a trading company?

A:  We are a manufacture which located in Chengdu city and Yibin city, Sichuan, China.

Q:  Can you customize the products?

A:  Yes, we are professional to customize glass bottle, we can design the new drawings and  open the new molds according to your requirement.

Q:  Do you provide free sample?

A:  Yes, for cooperation sincerity, we are glad to provide you samples for free, but for new customer, the express cost need to be paid.

Q:  What is your MOQ?

A:  Our only standard for MOQ is a 40 feet container.

Q:  How long is your sample lead time, mold need time and production lead time?

A:  New design drawing confirm within 3 days, sample mold within 20 days, bulk molds within 30 days, produce in bulk within 30 days



Glass Teaware,Opal Glass Teaware,Borosilicate Glass Teaware,Glass Teapot